Shop
Showing 241–255 of 2311 resultsSorted by popularity
-
Light Stands & Mounting, Lighting & Studio, Truss Equipment
Kupo KCP-820 SLIM TYPE SWIVEL COUPLER
Features:
- Load Capacity: 600 lb
- High Tensile-Strength Aluminum
- Accepts 1.5 to 2″ Diameter Truss
- Allows for Full 360-Degree Movement
Constructed from high-tensile aluminum, the black-finished Kupo Slim Type Swivel Coupler has two jaws that will accept truss diameters from 1.5 to 2″ and support loads up to 600 lb. The jaws swivel 360 degrees so you can mount truss sections at different angles.SKU: KCP-820 -
General Accessories, Lighting & Studio
Kupo SW-01 SAFTY WIRE 3.5MM, 80CM LENGTH
Features:
- Stainless Steel
- Load Rating of 22 lb
- Carabiner Closure
This Safety Wire from Kupo is a lightweight stainless steel safety cable. It is 29.52″ (80 cm) long, and has a diameter of 0.13″ (3.5mm) with a load rating of 22 pounds. The wire has a secure carabiner closure.SKU: SW-01 -
Light Stands & Mounting, Lighting & Studio, Truss Equipment
Kupo C-12 STEEL CLAMP FIT DIA 30-60MM TUBE
Light Stands & Mounting, Lighting & Studio, Truss EquipmentKupo C-12 STEEL CLAMP FIT DIA 30-60MM TUBE
Features:
- Hang Large Lighting Fixture on a Pipe
- Weight Capacity: 88 lb
- Durable Rolled Steel Construction
- Tommy Bar Included for Extra Leverage
This silver Steel Clamp from Kupo is designed for hanging a large lighting fixture from a pipe. It has an 88 lb weight capacity, and it is constructed from durable rolled steel.SKU: C-12 -
Hooks & Hangers, Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KS-012 SWIVEL HOOK
Hooks & Hangers, Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KS-012 SWIVEL HOOK
Features:
The Steel U hook with a hex pin is perfect for hanging strobe packs, ballasts, or rigging background crossbars to light stands. The hook accepts pipes that measure 2” in diameter.
SKU: KS-012 -
Butterflies & Reflectors, Light Modifiers, Lighting & Studio
Kupo KHR-L112 FRAME CORNER FOR 1-1/2 INCH PIPE
Butterflies & Reflectors, Light Modifiers, Lighting & StudioKupo KHR-L112 FRAME CORNER FOR 1-1/2 INCH PIPE
Features:
- Round Pipe Butterfly Frame Corner
- Steel Ring Welded on Corner
- Heavy-Duty, Chrome-Plated Steel
The heavy-duty, chrome-plated Frame Corner for 1-1/2″ Schedule 40 Pipe from Kupo is one of four needed to make a round butterfly frame with 1-1/2″ pipe. It has a steel ring welded to the corner to stabilize the frame with cord or rope.SKU: KHR-L112 -
Butterflies & Reflectors, Light Modifiers, Lighting & Studio
Kupo KHR-C112 FRAME CONNECTOR FOR 1-1/2 INCH PIPE
Butterflies & Reflectors, Light Modifiers, Lighting & StudioKupo KHR-C112 FRAME CONNECTOR FOR 1-1/2 INCH PIPE
Features:
- For the Round Pipe Butterfly Frame.
- Steel Welded
- Ergonomic T-Handles, Secure Tightening
One of four required, the chrome-plated Frame Connector for 1-1/2″ Schedule 40 Pipe from Kupo accepts lengths of 1.5″ diameter to create a butterfly frame to your desired size.SKU: KHR-C112 -
Clamps & Clips, Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KCP-600 4 INCH SUPER VISER
Clamps & Clips, Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KCP-600 4 INCH SUPER VISER
Features:
- Steel and Aluminum Construction
- 66.1 lb Load Capacity
- Hex Receiver and 5/8″ Knurled Pin
Designed for use as an accessory or substitute for a light stand or on its own as a support, the End Jaw, 4″ Super Viser Clamp from Kupo is a highly useful accessory on set or in the field. The clamp has a 4″ main bolt with a channel (chamfered slot) cut into it to prevent its jaws from rotating when in use. Each clamp jaw is covered in a removable rubber surface that guaranties objects hold fast and aren’t scratched. Capable of handling items weighing up to 66.1 lb, the clamp has a knurled 5/8″ pin at one end and a hex receiver at the other for additional mounting options.SKU: KCP-600 -
Light Stands & Mounting, Lighting & Studio, Mounting Hardware, Truss Equipment
Kupo KCP-704 STAGE CLAMP WITH 28MM STUD
Light Stands & Mounting, Lighting & Studio, Mounting Hardware, Truss EquipmentKupo KCP-704 STAGE CLAMP WITH 28MM STUD
Features:
- Weight Capacity: 110 lb
- Fits Outer Diameter of 1.5 to 2″
- Solid Steel Construction
- Attaches via 28mm Stud
This Stage Clamp with 28mm Stud from Kupo is constructed of solid steel and it allows you to suspend equipment and accessories weighing up to 110 lb. It is represented here in a galvanized finish and equipped with a 28mm stud for attachment.SKU: KCP-704 -
Light Stands & Mounting, Lighting & Studio, Mounting Hardware, Truss Equipment
Kupo KCP-702 STAGE CLAMP WITH 13MM HOLE
Light Stands & Mounting, Lighting & Studio, Mounting Hardware, Truss EquipmentKupo KCP-702 STAGE CLAMP WITH 13MM HOLE
Features:
- Weight Capacity: 110 lb
- Fits Outer Diameter of 1.5 to 2″
- Solid Steel Construction
- Attaches via 13mm Hole
This Stage Clamp with 13mm Hole from Kupo is constructed of solid steel and it allows you to suspend equipment and accessories weighing up to 110 lb. It is represented here in a galvanized finish and equipped with a 13mm hole for attachment.SKU: KCP-702 -
Clamps & Clips, Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KCP-360P ALLI CLAMP POLISH
Clamps & Clips, Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KCP-360P ALLI CLAMP POLISH
Features:
- All-Purpose Spring Clamp
- Accepts Any 5/8″ Stud
- Jaw Opens from 0.2 – 1.6″
- Steel & Aluminum
The Alli Clamp from Kupo is an all-purpose spring clamp with a baby 5/8-inch receiver to accept any baby 5/8-inch stud. The jaw offers a reliable hold and opens from 0.2 – 1.6 inches. This accessory is ideal for holding a fill card or flag. The clamp is made of steel and aluminum and has a powder coated black finish.SKU: KCP-360P -
Clamps & Clips, Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KD-C04P UNIVERSAL JOINT
Clamps & Clips, Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KD-C04P UNIVERSAL JOINT
Features:
This super joint is extreme flexibility and easy to assemble by the modular system of tubes and casting clamps that allows you to design and create all sorts of structure for your lighting, video & equipment and accessories.
SKU: KD-C04P -
Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KD-C03P JOINT WITH SCREW
Features:
This super joint is extreme flexibility and easy to assemble by the modular system of tubes and casting clamps that allows you to design and create all sorts of structure for your lighting, video & equipment and accessories.
SKU: KD-C03P
