Shop
Showing 271–285 of 2311 resultsSorted by popularity
-
Conversion Adapters, Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KS-080 WALL RACE M10 STUD
Conversion Adapters, Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KS-080 WALL RACE M10 STUD
Features:
- Rotating 28mm Spigot with M10 Screw
- Includes M10 Wingnut
- Locking Knob Controls Panning Position
- Chrome Plated
The Ball Race Follow Spot Spigot from Kupo is a rotating 28mm spigot with an M10 threaded screw that makes a lighting fixture into a follow spot with smooth panning action. The smooth action is achieved via internal roller bearings, and the locking knob controls the fixture’s position.SKU: KS-080 -
Conversion Adapters, Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KS-082 WALL RACE M12 STUD
Conversion Adapters, Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KS-082 WALL RACE M12 STUD
Features:
- Rotating 28mm Spigot with M12 Screw
- Includes M12 Wingnut
- Locking Knob Controls Panning Position
- Chrome Plated
The Ball Race Follow Spot Spigot from Kupo is a rotating 28mm spigot with an M12 threaded screw that makes a lighting fixture into a follow spot with smooth panning action. The smooth action is achieved via internal roller bearings, and the locking knob controls the fixture’s position.SKU: KS-082 -
Light Stands & Mounting, Lighting & Studio, Truss Equipment
Kupo KCP-857 HALF SWIVEL COUPLER
Features:
- Load Capacity: 308.65 lb
- High-Tensile Strength Aluminum
- Accepts 2 to 2.34″ Diameter Truss
- Allows for Full 360-Degree Movement
Constructed from high-tensile aluminum, the Kupo Mighty Half Swivel Coupler with silver finish has two jaws that will accept truss or pipe diameters from 2 to 2.34″ and support loads up to 308.65 lb. The jaws swivel 360 degrees so that you can mount truss sections at different angles. A drift pin is also supplied for fixing in a 90-degree configuration.SKU: KCP-857 -
-
Conversion Adapters, Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KS-092 MALE ADOPTER 5/8 INCH
Conversion Adapters, Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KS-092 MALE ADOPTER 5/8 INCH
Key Features
- Conversion Adapter
This 3/8″-16 Male to 1/4″-20 Male Thread Adapter from Kupo is a small brass adapter that converts a 3/8″-16 female thread into a 1/4″-20 male thread.SKU: KS-092 -
Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KS-034 PIN 28MM WITH M10 THREAD
Features:
- Rotating 28mm Spigot with M10 Screw
- Includes M10 Wingnut
- Locking Knob Controls Panning Position
- Chrome Plated
The Ball Race Follow Spot Spigot from Kupo is a rotating 28mm spigot with an M10 threaded screw that makes a lighting fixture into a follow spot with smooth panning action. The smooth action is achieved via internal roller bearings, and the locking knob controls the fixture’s position.SKU: KS-034 -
Boom Equipment, Light Stands & Mounting, Lighting & Studio
Kupo KP-M1527PD KUPOLE POLISH WITH 2 RUBBER COVER
Boom Equipment, Light Stands & Mounting, Lighting & StudioKupo KP-M1527PD KUPOLE POLISH WITH 2 RUBBER COVER
Features:
THE 1.5M KUPOLE (SILVER ANODISED) IS A SPRING LOCKING CEILING-TO-FLOOR OR WALL-TO WALL POLE SYSTEM WITH AN ADJUSTMENT RANGE OF 59.0 – 106.3″ (150 – 270 CM) THAT CAN BE SET UP IN SECONDS WITH A FLIP OF ITS HANDLE.
SKU: KP-M1527PD -
Clamps & Clips, Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KCP-950P 4 WAY CLAMP FOR 35MM TO 50MM TUBE
Clamps & Clips, Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KCP-950P 4 WAY CLAMP FOR 35MM TO 50MM TUBE
Features:
- Mounts Around Tubing Sized 1.4-2.0″
- Four Recessed Mounting Points
- Aluminum Construction
- Supports Loads up to 66 lb (30 kg)
The 4-Way Clamp from Kupo is designed to mount quickly around any tubing measuring between 1.4 inches and 2 inches. It has four recessed mounting positions, and accepts several interchangeable accessories. The clamp is made from aluminum and can support loads of up to 66 pounds.SKU: KCP-950P -
Clamps & Clips, Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KCP-700P CONRI CLAMP SILVER
Clamps & Clips, Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KCP-700P CONRI CLAMP SILVER
Features:
- Ratcheted Handle for Repositioning
- Accepts Select Convi Accessories
- Lightweight Alloy Construction
- Stainless Steel Bolts
The Convi Clamp With Adjustable Handle from Kupo has a hexagonal receiver that accepts many Convi accessories to mount almost any light fixture, camera or accessory. This clamp has a ratcheted handle that allows you to reposition it in case you don’t have clearance to rotate the handle in a complete circle to tighten or loosen it.SKU: KCP-700P -
Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KCP-606 CHAIN CLAMP 10 INCH
Features:
- Wraps Around Odd-Shaped Objects
- Two 5/8″ Baby Pins
- Heat-Treated Alloy Steel Construction
- Locking Release Lever Set-Screw Knob
Especially handy on location, the 10″ Chain Clamp from Kupo is designed to wrap around odd-shaped objects to offer a mount for light fixtures. The steel clamp has two 5/8″ studs textured for maximum grip for fixtures with matching 5/8″ receivers. Its release lever has a set screw to lock it down to prevent accidental opening.SKU: KCP-606 -
Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KCP-550 SMALL ADJUSTABLE GAFFER GRIP
Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KCP-550 SMALL ADJUSTABLE GAFFER GRIP
Features:
- Quick-Mount, Multi-Purpose Clamp
- Grabs Most Surfaces Flat or Round
- Adjustable Jaws: 0.98 – 2.56″
- Steel Construction
The Adjustable Gaffer Grip from Kupo is a quick-mount, multi-purpose steel clamp that will grab on most surfaces flat or round. The clamp has one fixed baby 5/8-inch stud and one reversible baby 5/8-inch stud with both 1/4″-20 and 3/8″-16 threads on either side. The reversible stud is mounted in a baby 5/8″ (16 mm) receiver.SKU: KCP-550 -
Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KCP-200P GRIP HEAD
Features:
- Mounts Lights / Accessories on C-Stands
The Impact Grip Head for Lights and Accessories – 2.5″ Diameter (Chrome) mounts lights, light modifiers, scrims, flags, cutters, and other lighting accessories onto C-stands or butterfly frames.SKU: KCP-200P
