Shop
Showing 226–240 of 2311 resultsSorted by popularity
-
-
Light Stands & Mounting, Lighting & Studio, Truss Equipment
Kupo C-06 IRON CASTING C- CLAMP
Features:
- Load Capacity: 220 lb
- Cast Iron with Black Powder Coat Finish
- Fits Tubes with 1.5 to 2″ OD
Made to attach to tubes with a 1.5 to 2″ outer diameter and used like a C-clamp, the Kupo Iron Casting Clamp has a 2.5″-long steel shaft with 1/2″-13 yoke bolt and washer. It can support up to 220 lb.SKU: C-06 -
Hooks & Hangers, Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KD-735P MINI FLEX ARM WITH CLIP
Hooks & Hangers, Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KD-735P MINI FLEX ARM WITH CLIP
Features:
- 3/8″-16 F Thread Inside 5/8″ Adapter
- Alligator Clip
- Aluminum
Kupo’s Mini Flex Arm With Alligator Clip is a mini flex arm with a 3/8″-16 female thread inside a baby 5/8″ (16 mm) adapter on one side and an alligator clip on the other. This is the perfect accessory to hold small items like a mini flag or reflector so you can get the perfect shot.SKU: KD-735P -
Light Stands & Mounting, Lighting & Studio, Mounting Hardware, Receptors & Pins, Studs
Kupo KCP-340 BABY PLATE WITH EZ GRIP FINGER
Light Stands & Mounting, Lighting & Studio, Mounting Hardware, Receptors & Pins, StudsKupo KCP-340 BABY PLATE WITH EZ GRIP FINGER
Features:
- Aluminum Construction
- 5/8″ Pin, 5/8″ Receiver
- 1 1/8″ Base Fits into Junior Receiver
The Kupo EZ Grip Finger with Baby 5/8″ Stud and Receiver has a 5/8″ stud on one side and a 5/8″ receiver on the other connected by a large ball joint. The baby receiver has a metal knob to lock it securely in place. With the knob removed, the outside of the receiver is a Junior 1 1/8″ pin that can fit into any junior receiver. The ball joint is locked in place with a large metal knob with needle bearings to give you maximum torque.SKU: KCP-340 -
Light Stands & Mounting, Lighting & Studio, Mounting Hardware, Receptors & Pins, Studs
Kupo KCP-320 EZ GRIP TWINS
Light Stands & Mounting, Lighting & Studio, Mounting Hardware, Receptors & Pins, StudsKupo KCP-320 EZ GRIP TWINS
Features:
- 2 x 5/8″ Baby Pins
- Pivots -45 to 90°
- Collar Rotates 360°
- Solid Steel Construction
The EZ Grip Twins from Kupo connects two 5/8″ Baby pins to a ball joint, which pivots -45° to 90° while the collar rotates 360°. The unit is constructed of solid steel and is equipped with bearings for additional torque and gripping power.SKU: KCP-320 -
Clamps & Clips, Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KCP-832 SWIVEL COUPLER
Clamps & Clips, Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KCP-832 SWIVEL COUPLER
Features:
- Fits tube Ø 48-51mm to Ø 48-51mm
- For quick and easy interconnection for truss, pipes or bars.
- Allows a full 360 degree of movement.
- Drift pin also supplied for fixing in a 90 degree configuration.
SKU: KCP-832 -
Light Stands & Mounting, Lighting & Studio, Mounting Hardware, Truss Equipment
Kupo KCP-705 STAGE CLAMP WITH 28MM SOCKET
Light Stands & Mounting, Lighting & Studio, Mounting Hardware, Truss EquipmentKupo KCP-705 STAGE CLAMP WITH 28MM SOCKET
Features:
- Hang a Lighting Fixture on a Pipe
- Equipped with Linch Pin and Safety Wire
- Weight Capacity: 110 lb
- Solid Steel Construction
This Steel Clamp from Kupo is designed for hanging a lighting fixture from a pipe. Made of solid steel and featuring a 1 1/8″ socket for mounting compatible fixtures, this clamp can support a maximum payload of 110 lb. It comes equipped with a linch pin and safety wire to ensure a secure installation.SKU: KCP-705 -
Light Stands & Mounting, Lighting & Studio, Mounting Hardware, Receptors & Pins, Studs
Kupo KS-048 JUNIOR WALL PLATE
Light Stands & Mounting, Lighting & Studio, Mounting Hardware, Receptors & Pins, StudsKupo KS-048 JUNIOR WALL PLATE
Features:
- Eight Anchor Points
- Metal Locking Knob
- Chrome-Plated Steel Finish
The Junior 3″ Wall Plate, Junior 1-1/8″ Receiver from Kupo lets you mount a 1-1/8″ receiver on a wall, other flat surface or just about anywhere. The plate can be mounted with screws or nails through any of the pre-drilled eight anchor points. This wall plate features a metal locking knob and chrome-plated steel finish.SKU: KS-048 -
Brackets, Light Stands & Mounting, Lighting & Studio, Mounting Hardware
Kupo KS-046 3 INCH BABY WALL PLATE
Brackets, Light Stands & Mounting, Lighting & Studio, Mounting HardwareKupo KS-046 3 INCH BABY WALL PLATE
Features:
Same plate size 3.5 x 6”(9 x 15cm) and function as KS-044, but with a welded 3” long 5/8” baby stud. The 75mm x 75mm drilled holes allows to easy mount for any LCD monitor which comes with standard VESA mount 75mm x 75mm.
SKU: KS-046 -
Light Stands & Mounting, Lighting & Studio, Truss Equipment
Kupo KCP-830 HALF TYPE COUPLER 1/2
Features:
- 110 lb Load Capacity
- Fits O.D. 1.9 to 2″ Tube or Pipe
- Aluminum Construction
- Second Safety Lock System
Made from high-tensile aluminum, the black-finished Slim Type Half Coupler with Baby Receiver from Kupo fits O.D. 1.9 to 2″ tube or pipe and is able to support lights and gear weighing up to 110 lb. The coupler has a safety lock system to avoid possible hazards.SKU: KCP-830
