The BCJ-XJ-TRC 110Ω-to-75Ω Digital Audio Impedance Transformer from Canare is a transformer that passively converts all standard AES/EBU digital audio signals from 110Ω/XLR3 to 75Ω BNC coaxial cable. This solution is ideal for use in post-production suites, DAT routing, recording studios, and digital audio tie lines. It also permits longer cable runs in comparison with twisted pair 110Ω and additionally provides excellent rejection against hum and noise.
Canare BCJ-XJ-TRC 110 Ohm to 75 Ohm Digital Audio Impedance Transformer
In stock
Key Features
- XLR/F to BNC/F
In stock
Construction
- Metal
Finish
- Silver, gray, red
Input
- (1) XLR3 female 110Ω
Output
- (1) BNC receptacle 75Ω
Dimensions
- Not specified by manufacturer
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
Studio & EFP Equipment, Production Switchers & Controllers, Professional Video Switchers
Datavideo SE-500 4-Channel Analog SD Video Switcher
Studio & EFP Equipment, Production Switchers & Controllers, Professional Video SwitchersDatavideo SE-500 4-Channel Analog SD Video Switcher
Key Features
- 4 Input, 2 Output Analog Switcher
- 4-Channel Analog Audio Mixer
- Multiplexed Composite Preview Output
Compact and lightweight, the Datavideo SE-500 4-Channel Analog SD Video Switcher features composite and S-Video inputs and outputs for switching live events at houses of worship, conventions, educational institutions, small studios, and other venues.
SKU: SE-500 -
Signal Processing & Distribution, Distribution Amplifiers, Professional Video Distribution Amplifiers
EVERTZ – Analog Audio Distribution Amplifier 500ADA-AUD
Signal Processing & Distribution, Distribution Amplifiers, Professional Video Distribution AmplifiersEVERTZ – Analog Audio Distribution Amplifier 500ADA-AUD
The 500ADA-AUD Analog Audio distribution amplifier is a general purpose 1×4 amplifier for distributing analog audio signals.
The 500ADA-AUD can be operated with either differential or single ended inputs and offers a wide range of gain adjustment to handle a wide variety of input signals.
The 500ADA-AUD is housed in the 3RU 500FR frame that will hold up to 16 modules.
SKU: 500ADA-AUD -
Pro Audio, Computer Audio, Computer Audio Hardware, Accessories
Clear-Com PANEL BREAKOUT 4 PORT IFB
RU 4-Port XLR-3 IFB Intercom/Audio Cue break out matrix interface. Each IFB output and prog audio / Cue audio uses XLR-3 I/O and is transformer balanced. Connections to the matrix use RJ-45.
SKU: IFB-104 -
Pro Audio, Computer Audio, Computer Audio Hardware, Audio Interfaces & Systems
MXL MicMate Pro – USB Adapter Interface for Microphones with XLR Outputs
Pro Audio, Computer Audio, Computer Audio Hardware, Audio Interfaces & SystemsMXL MicMate Pro – USB Adapter Interface for Microphones with XLR Outputs
Key Features
- Converts XLR to USB Output
- Supplies +48V Phantom Power
- Headphone Monitoring with Level Control
- Mic Input Gain Control
The MXL MicMate Pro USB Adapter Interface converts the XLR output on professional microphones, to a USB output for direct connection to laptop and desktop computers. The MicMate Pro will work with any microphone with an XLR output and sends +48V phantom power to condenser microphones.SKU: MXL-MICMATE PRO -
Professional Video, Signal Processing & Distribution, Distribution Amplifiers, Professional Video Distribution Amplifiers
Evertz 7700ADA-AUD Balanced Analog Audio Distribution Amplifier
Professional Video, Signal Processing & Distribution, Distribution Amplifiers, Professional Video Distribution AmplifiersEvertz 7700ADA-AUD Balanced Analog Audio Distribution Amplifier
Features
- Differential and single ended input (automatic single ended to differential conversion)
- Configurable for stereo (2-1×4) or mono (1×8)
- High impedance input
- Low impedance outputs
- Wide gain adjustment range
- High common mode range and common mode rejection ratio (CMRR)
- Very high SNR
- Very low THD+N
- Card Edge LEDs
- Module status/Local fault
SKU: 7700ADA-AUD+3RU








There are no reviews yet.