The 7700ADA-AUD Dual Analog Audio Distribution Amplifier is a general purpose amplifier for distributing analog audio signals. It can be operated as two independent 4-output amplifiers for stereo signals, or as a single amplifier with eight outputs where higher fanout is required.
The 7700ADA-AUD can be operated with either differential or single ended inputs and offers a wide range of gain adjustment to handle a wide variety of input signals.
Analog Audio Input
Standards
Number of Inputs
- 2 (Balanced or Single ended)
Connectors
- 3-pin removable terminal strips
Input Step Gain
- 0dB or +6.5dB (configurable with jumpers)
Fine Gain Control
- -6.5dB to +9.5dB (card edge pot adjustable)
0dB Input Gain
+6.5dB Input Gain
Noise Floor
- -87dBu (0dB input gain), -91dBu (+6.5dB input gain jumper setup)
Common Mode Rejection
- 115dB @ 60Hz, 90dB @ 20kHz (tested with +28dBu CM input)
0dB Input Gain
+6.5dB Input Gain
Input impedance
- 0dB gain 33kΩ
- +6.5dB gain 18kΩ
Analog Audio Outputs
Stereo Mode
- 4 outputs each on left and right channels
Mono Mode
Connectors
- 3-pin removable terminal strips
Output Step Gain
- 0, 3.5 or 9.5dB (configurable with jumpers)
Max Output Level
- +28dBu across hi-impedance load
- +24dBm into 600Ω load
Output Impedance
Frequency Response
Stereo Phase Mismatch
0dB Input Gain
+6.5dB Input Gain
THD+ Noise
- 0.001% 20Hz to 20kHz @ 28dBu, unweighted RMS, Hi-Z load
- 0.01% with 600Ω up to 24dBm
Intermodulation Distortion
Stereo Crosstalk
- 115dB @ 1kHz, > 93dB @ 20kHz
Output Isolation
110dB @ 1kHz, 100dB @ 20kHz
Electrical
Voltage
Power
EMI/RFI
- Complies with FCC Part 15, Class A, EU EMC Directive
Physical
Number of Slots
There are no reviews yet.