Rode Stereo VideoMic Pro Rycote
In stock
Key Features
- Ideal for Video & DSLR Cameras
- Integrated Rycote Lyre Shockmount
- Matched Pair, 1/2″ Condenser Capsules
- XY Stereo Configuration
The Stereo VideoMic Pro Rycote from Rode builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.
The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.
Transducer
- Pressure gradient
Polar Pattern
- XY Cardioid
Frequency Range
- 40 Hz to 20 kHz (selectable HPF @ 75 Hz)
Sensitivity
- -38 dB (12.6 mV @ 94 dB SPL) ±2 dB re 1 V/Pa @ 1 kHz
Output Impedance
- 200 Ohms
Maximum Output
- +4.2 dBu (@ 1% THD into 1 kOhms)
Dynamic Range
- 100 dB
Maximum SPL
- 134 dB, max (1 kHz, 1% THD into 1 kOhms load)
Signal / Noise
- 76 dBA (A-weighted per IED651)
Power Supply
- 9 V alkaline battery
Connection
- 1/8″ (3.5 mm) stereo mini-jack
Signal to Noise Ratio
- 76 dBA SPL (A-weighted per IEC651)
Dimensions (D x W x H)
- 4.5 x 3.1 x 5.3″ (115 x 80 x 134 mm)
Weight
- 0.26 lb (116 g) (without battery)
You may also like…
-
Professional Video, Cables, Cable Accessories, Video Connectors
Canare 20DV 2×20 Digital Video Patchbay (1RU)
Professional Video, Cables, Cable Accessories, Video ConnectorsCanare 20DV 2×20 Digital Video Patchbay (1RU)
Key Features
- Supports 3G-Ready HD-SDI Signals
- DVJB-W 75 Ohm Dual Video Jacks
- Rotary Switch Technology
- Normal Through Signal Routing
Designed and built to provide “true” broadcast-quality HDTV digital video signal routing capabilities, Canarie introduces its 20DV 2×20 Digital Video Patchbay into the professional arena. It combines unsurpassed clarity and signal reliability with the ability to pass uncompressed HD-SDI 1080p video signals up to an amazing 3Gbps. Its rugged 1RU design houses (20) DVJB-W 75 Ohm dual video jacks that are each configured with an independently developed rotary switch, which offer a dual-contact construction for improved contact stability. Specifically designed for use with high frequency signals, these jacks provide superior signal isolation and can double as a digital audio AES/EBU patching solution. Moreover, each DVJB-W jack offers “normal through” signal routing that provides a normalled route between top and bottom jacks – and it utilizes VPC series patch cords.
SKU: 20DV -
Professional Video, Cables, Specialty Video Cables, Bulk Video Cables
Canare LV-77S Video Coaxial Cable
Professional Video, Cables, Specialty Video Cables, Bulk Video CablesCanare LV-77S Video Coaxial Cable
Key Features
- Offers Good Signal Protection
- For Broadcast Transmission
- Solid Polyethylene Dielectric
- 0.30″ (7.7mm) Outside Diameter
The Canare LV-77S Video Coaxial Cable is a professional-standard cable that offers good signal protection and is used for broadcast transmission and inter-rack wiring. This long-lasting and reliable cable has a solid polyethylene dielectric construction and is made of copper. The cable is double shielded for durability.
SKU: LV-77S -
Pro Audio, Audio for Video, Wired Microphones, Shotgun Wind Protection
Rode Dead Kitten Artificial Fur Wind Shield
Pro Audio, Audio for Video, Wired Microphones, Shotgun Wind ProtectionRode Dead Kitten Artificial Fur Wind Shield
Key Features
- Furry High-Wind Microphone Cover
- Minimizes Wind Noise
- Remains Acoustically Transparent
- Compatible with Stereo VideoMic
The RODE Dead Kitten Artificial Fur Wind Shield is designed for use with the RODE Stereo VideoMic, RODE Stereo VideoMic Pro, RODE Stereo VideoMic Pro Rycote, RODE WS4, and RODE NT4 microphone. It’s specially designed with artificial fur that minimizes wind noise, while also remaining acoustically transparent. The Dead Kitten is actually the exact wind shield included with the Stereo VideoMic and is designed to suppress noise caused by high wind while outdoors.SKU: DEADKITTEN
Related products
-
Pro Audio, Wireless Microphone Systems, Microphones for Wireless
Sennheiser ME 2 Omnidirectional Condenser Lavalier Microphone
Pro Audio, Wireless Microphone Systems, Microphones for WirelessSennheiser ME 2 Omnidirectional Condenser Lavalier Microphone
- 1/8″ (3.5mm) mini-jack
- Works with the 100, 300 and 500 Evolution Series, as well as AVX Series wireless bodypack transmitters
- Warm, clear and robust broadcast-quality sound reproduction
SKU: ME-2 (N/US) -
Pro Audio, Live sound, In-Ear Monitoring, Receivers
Sennheiser Evolution EK 300 IEM G2 Body Pack Receiver
Pro Audio, Live sound, In-Ear Monitoring, ReceiversSennheiser Evolution EK 300 IEM G2 Body Pack Receiver
Key Features
- IE 4 Earphones
Sennheiser’s EK 300 IEM G2 Monitoring Body Pack Receiver is designed for rugged live work. It has an intuitive interface that is protected against accidental settings changes.
SKU: EK300-IEM-G2 -
Pro Audio, Live sound, Wireless Microphones, Wireless Systems
Sennheiser EW335 G3 Wireless Handheld Microphone System with MD835 Mic (B: 626 to 668 MHz)
Pro Audio, Live sound, Wireless Microphones, Wireless SystemsSennheiser EW335 G3 Wireless Handheld Microphone System with MD835 Mic (B: 626 to 668 MHz)
Key Features
- Frequency B: 626 to 668 MHz
- UHF Receiver
- Handheld Transmitter
- MD835 Cardioid Dynamic Capsule
The Sennheiser EW335 G3 Wireless Handheld Microphone provides dependable performance for both speech and performance applications and includes a UHF diversity receiver and handheld transmitter. The transmitter and receiver synchronize channel and frequency at the touch of a button. An ethernet port is featured on the EM300 rackmount
SKU: EW335-G3 -
Pro Audio, Wireless Microphone Systems, Antenna Accessories
Sennheiser ASP 212 – 2-Way Passive Antenna Splitter
Pro Audio, Wireless Microphone Systems, Antenna AccessoriesSennheiser ASP 212 – 2-Way Passive Antenna Splitter
Key Features
- 2 x 1 : 2
- DC-Coupled for Use with Antenna Boosters
The ASP 212 from Sennheiser is a 2-way passive antenna splitter. The splitter is DC-coupled for use with antenna boosters.SKU: ASP-212 -
Pro Audio, Audio for Video, Wired Microphones, Audio Wired Shotgun Mics ENG/EFP
Panasonic AG-MC200G Unidirectional Microphone
Pro Audio, Audio for Video, Wired Microphones, Audio Wired Shotgun Mics ENG/EFPPanasonic AG-MC200G Unidirectional Microphone
Key Features
- Supercardioid Condenser Microphone
- Requires 48V Phantom Power
- 3-Pin XLR Output Connector
- 160 Hz to 20 Hz Frequency Response
The AG-MC200G Unidirectional Microphone from Panasonic is a camera-mounted, electret condenser mic designed to capture audio for video cameras, recorders, field mixers, and more. The focused pick up pattern of the AG-MC200G eliminates audio at the sides of the microphone, greatly reducing ambiance and potential feedback problems.
SKU: AG-MC200G
