Rode NTG2 Shotgun Microphone
In stock
Key Features
- For Indie Films, TV & Documentaries
- AA Battery or Phantom Powered
- Selectable 80 Hz Low-Cut Filter
- Low Handling Noise
Capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG2 shotgun microphone. With low handling noise, the ability to endure loud sound sources before distortion, and support for battery or phantom power, the NTG2 offers a versatile, cost-effective solution for recording clean dialogue and sound effects.
The NTG2’s elevated sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG2 delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing selectable low-cut filter. The durable and lightweight high-grade aluminum housing is finished in hard-wearing epoxy paint to withstand the stress of location recording.
Microphone
Form Factor
- Stand/Boom Mount
Sound Field
- Mono
Operating Principle
- Line Gradient
Capsule
- Condenser
Diaphragm
- 0.5″ / 12.70 mm
Polar Pattern
- Supercardioid
Orientation
- End Address
Circuitry
- Solid-State (JFET)
Pad
- None
High-Pass Filter
- 80 Hz, 12 dB/Octave
Tone Adjustment
- None
Indicators
- None
On-Board Controls
- High-Pass Filter
Windscreen
- Foam (Included)
Performance
Frequency Range
- 20 Hz to 20 kHz
Maximum SPL
- 131 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection
- 14 dB at 60°
- 16 dB at 120°
- 12 dB at 180°
Impedance
- 250 Ohms (Phantom Power)
- 350 Ohms (Battery Power)
Sensitivity
- -36 dBV/Pa at 1 kHz
Output Level
- 6.9 mV (Max)
Dynamic Range
- 113 dB
Signal-to-Noise Ratio
- 76 dB A-Weighted (1 kHz)
Equivalent Noise Level
- 18 dB A-Weighted
Connectivity
Output Connectors (Analog)
- 1 x XLR 3-Pin
Power
Operating Voltage
- 48 V (Phantom Power)
- 1.5 V (Battery Power)
Operating Current Consumption
- 2 mA (Phantom Power)
- 0.18 mA (Battery Power)
Battery Type
- 1 x AA
Physical
Color
- Black
Mounting
- 3/8″-16 Female, 5/8″-27 Female, Mic Clip (with Included Hardware)
Construction Material
- Aluminum
Dimensions
- ø: 0.87 x L: 11.02″ / ø: 22 x L: 280 mm
You may also like…
-
Pro Audio, Studio Recording, Recording Microphones, Modulator microphone components
Sennheiser ME67 Supercardioid Spot Shotgun Mic Capsule
Pro Audio, Studio Recording, Recording Microphones, Modulator microphone componentsSennheiser ME67 Supercardioid Spot Shotgun Mic Capsule
Key Features
- For Use with K6 and K6P Powering Modules
- Supercardioid Polar Pattern
- Long Gun Microphone-Head Design
- Highly Directional
The ME 67 is a long gun microphone capsule designed for use with the K6 and K6P powering modules. A
highly directional microphone, it can be used where the microphone must be placed at a distance from the
sound source. The mic features a matt-black, anodized, and scratch-resistant finish.
SKU: ME-67 -
Pro Audio, Audio for Video, Wired Microphones, Shotgun Microphones
Sennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone
Pro Audio, Audio for Video, Wired Microphones, Shotgun MicrophonesSennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone
Key Features
- For Pro Film, TV & Location Recording
- Moisture-Resistant for Humid Conditions
- No Switches, Buttons, or Dials
- 40 Hz to 20 kHz Frequency Response
Achieve superb audio capture in demanding conditions for your next professional film, TV, or location recording with the Sennheiser MKH 416-P48U3 moisture-resistant shotgun microphone. Mix-ready sound quality is provided by its sharp directivity, low noise, and strong output. Plus, there are no controls to worry about; the MKH 416-P48U3 delivers the reliability you need for high-pressure gigs.SKU: MKH-416P48V3 -
Professional Video, Professional Camcorders
Panasonic AG-CX10 4K Camcorder with NDI/HX
Key Features
- Up to UHD 4K60 Video, 3G-SDI, HDMI Out
- NDI/HX for Streaming and IP Control
- 1/2.5″ 8.29M MOS Sensor, Venus Engine
- 24x Optical Zoom, 48x Digital iZoom
Whether you’re shooting for broadcast, behind the scenes (BTS), documentary, narrative, or live streaming in HD and would like to add 4K to your repertoire, the Panasonic AG-CX10 4K Camcorder with NDI/HX can help balance your needs or allow you to jump straight to 4K.
SKU: AG-CX10 -
Pro Audio, Audio for Video, Wired Microphones, Shotgun Microphones
Sennheiser ME 66 Supercardioid Shotgun Microphone Head
Pro Audio, Audio for Video, Wired Microphones, Shotgun MicrophonesSennheiser ME 66 Supercardioid Shotgun Microphone Head
Key Features
- Supercardioid/Lobar Polar Pattern
- Enhanced Rejection of Off-Axis Sounds
- For K6 and K6P Powering Modules
- 40 Hz to 20 kHz Frequency Response
The Sennheiser ME 66 is a supercardioid shotgun condenser microphone designed to provide focused sound pickup for boom operators, sound engineers, and videographers in ENG, EFP, video and television production, broadcast, and interviews. Its supercardioid/lobar polar pattern delivers a tight, focused pickup area
SKU: ME-66
Related products
-
Pro Audio, Audio for Video, Wired Microphones, Audio Wired Shotgun Mics ENG/EFP
Panasonic AG-MC200G Unidirectional Microphone
Pro Audio, Audio for Video, Wired Microphones, Audio Wired Shotgun Mics ENG/EFPPanasonic AG-MC200G Unidirectional Microphone
Key Features
- Supercardioid Condenser Microphone
- Requires 48V Phantom Power
- 3-Pin XLR Output Connector
- 160 Hz to 20 Hz Frequency Response
The AG-MC200G Unidirectional Microphone from Panasonic is a camera-mounted, electret condenser mic designed to capture audio for video cameras, recorders, field mixers, and more. The focused pick up pattern of the AG-MC200G eliminates audio at the sides of the microphone, greatly reducing ambiance and potential feedback problems.
SKU: AG-MC200G -
Pro Audio, Live sound, In-Ear Monitoring, Receivers
Sennheiser Evolution EK 300 IEM G2 Body Pack Receiver
Pro Audio, Live sound, In-Ear Monitoring, ReceiversSennheiser Evolution EK 300 IEM G2 Body Pack Receiver
Key Features
- IE 4 Earphones
Sennheiser’s EK 300 IEM G2 Monitoring Body Pack Receiver is designed for rugged live work. It has an intuitive interface that is protected against accidental settings changes.
SKU: EK300-IEM-G2 -
Pro Audio, Audio for Video, Wireless Microphone Accessories, Cases & Carrying Gear
Sennheiser CC3 Carrying Case
Pro Audio, Audio for Video, Wireless Microphone Accessories, Cases & Carrying GearSennheiser CC3 Carrying Case
Key Features
- Fits Evolution EW G3 and G4 Components
- Plastic with Custom-Cut Interior
- Convoluted Foam in the Lid
- Molded Carry Handle
The Sennheiser CC3 Carrying Case (Black) is a plastic hardshell, foam-lined case designed to carry Sennheiser EW G3 and G4 Evolution wireless microphone components. The padding is precision die-cut with convoluted foam in the lid.
SKU: CC3 -
Pro Audio, Wireless Microphone Systems, Antenna Accessories
Sennheiser AC2 RF Combiner and Power Supply for Multiple SR 300 IEM Monitor Transmitters
Pro Audio, Wireless Microphone Systems, Antenna AccessoriesSennheiser AC2 RF Combiner and Power Supply for Multiple SR 300 IEM Monitor Transmitters
The Sennheiser AC2 is an RF signal combiner designed for use with the Sennheiser IEM G2 monitor system transmitters. The AC2 features four hardwired BNC cables for connecting four SR 300 transmitters. The AC2 combines the signal from all four transmitters and sends it via the single BNC antenna output. The AC2 also features DC power output cables for remotely powering connected SR 300 receivers.
SKU: AC2 -
Pro Audio, Wireless Microphone Systems, Antenna Accessories
Sennheiser AB 3 Antenna Booster (A: 516 to 558 MHz)
Pro Audio, Wireless Microphone Systems, Antenna AccessoriesSennheiser AB 3 Antenna Booster (A: 516 to 558 MHz)
Key Features
- For ew G3 Series Receivers
- Adds 10 dB of Amplification
- Suitable for Long Cable Runs
The AB 3 Antenna Booster (A: 516 to 558 MHz) from Sennheiser compensates for signal loss over long cable runs by adding 10 dB of amplification to ew G3 Series receivers.SKU: AB3-A
