, , ,

Genelec 8010 Bi-Amplified Active Monitor (Single, Producer Finish)

Genelec
Availability:

In stock


Key Features

  • 74 Hz to 20 kHz Frequency Response
  • 3/4″ Metal Dome Tweeter for Treble
  • 3″ Woofer for Bass
  • Bass Tilt Control
Styled in what the manufacturer has dubbed “Producer Finish,” the Genelec 8010 Bi-Amplified Active Monitor (Single) is designed for mixing and mastering in recording studios, broadcast facilities, and mobile work. The compact monitor utilizes independent 25W Class-D amplifiers to power a 3″ woofer and a 3/4″ metal dome tweeter housed in a die-cast aluminum enclosure.

In stock

Styled in what the manufacturer has dubbed “Producer Finish,” the Genelec 8010 Bi-Amplified Active Monitor (Single) is designed for mixing and mastering in recording studios, broadcast facilities, and mobile work. The compact monitor utilizes independent 25W Class-D amplifiers to power a 3″ woofer and a 3/4″ metal dome tweeter housed in a die-cast aluminum enclosure.

The monitor utilizes Genelec’s Directivity Control Waveguide and Minimum Diffraction Enclosure designs to tame box reflections, flatten the frequency response from 74 Hz to 20 kHz, and provide a maximum SPL of 96 dB.

The amplifiers utilize Genelec’s Intelligent Signal Sensing circuitry to conserve electricity, utilizing less than 0.5W in standby mode, 5W when idle, and 30W peak per amplifier at full output. The amplifier automatically detects the presence of an input signal and adjusts the power consumption of the monitor accordingly.

A bass tilt control allows you to adjust the bass response to fit the acoustics of your listening environment. The included ISO stand helps reduce the transmission of structural vibrations into your work surface.

Type

  • Active

Drivers

  • 1 x 0.8″ / 1.9 cm Tweeter
  • 1 x 3″ / 7.6 cm Woofer

Amplifier Output

  • Bass with 8-Ohm Load: 25 W
  • Treble with 8-Ohm Load: 25 W

Maximum SPL

  • Short Term at 1 m: ≥96 dB
  • Short Term at 0.5 m: ≥102 dB
  • Long Term at 1 m: ≥91 dB
  • Peak at 1 m: ≥105 dB

Filter

  • Lower Cut-Off Frequency, -3 dB: ≤73 Hz
  • Upper Cut-Off Frequency, -3 dB: ≥21 kHz

Frequency Response

  • 74 Hz to 20 kHz (±2.5 dB)
  • 67 Hz to 25 kHz (-6 dB)

Harmonic Distortion

  • 70 to 400 Hz: Above 400 Hz:

Input

  • 1 x Balanced 3-Pin XLR Female

Input Impedance

  • 10 kOhms

Input Level

  • For 100 dB SPL Output at 1 m: -6 dBu (Sensitivity -10 dB Off)
  • Level Control Range Relative to Max Output: -10 dB (Sensitivity -10 dB On)

Crossover Frequency

  • Bass/Treble: 3 kHz

Tilt

  • Bass Control in -2 dB Steps: 0 to -6 dB at 100 Hz

THD + N

  • ≤0.08%

Voltage

  • 100 to 240 VAC

Operating Range

  • Voltage: ± 10%

Power Consumption

  • Standby: Idle: 5 W
  • Full Output: 30 W

Dimensions (H x W x D)

  • With ISO Stand: 7.7 x 4.8 x 4.5″ / 19.5 x 12.1 x 11.5 cm
  • Without ISO Stand: 7.1 x 4.8 x 4.5″ / 18.1 x 12.1 x 11.5 cm

Weight

  • 3.3 lb / 1.5 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…

SHOPPING CART

close

Prices May Vary as Per Currency Parity


Please Contact us Before Placing an Order, Thank You.