Evertz RP-7720AD4 REAR PANEL (BACK PANEL) FOR 7720AD4 CARD
In stock
Features:
- Connector Terminal strip
- Sampling Rate 48kHz
- Impedance 110Ω balanced
- Dynamic Range 20-bit
- REAR PANEL (BACK PANEL) FOR 7720AD4 CARD Serial Video Input
- Standard SMPTE ST 259-C -525 & 625 component
- Connector 1 BNC per IEC 61169-8 Annex A
- Equalization Automatic 300m @ 270MB/s with Belden 8281 or equivalent cable
- Return Loss > 13dB up to 270MB/s
- Reclocked Serial Video Outputs
- Standard Same as input
- Number of Outputs 1 on 7720AD4-B, 2 on 7720AD4 and 7720AD-A4-2
- Connectors BNC per IEC 61169-8 Annex A
- Signal Level 800mV nominal
- DC Offset 0V ±0.5V
- Rise And Fall Time 700ps nominal
- Overshoot < 10% of amplitude
- Wide Band Jitter < 0.2UI
- Unbalanced AES Audio OutputsNot on -B versions
- Standard SMPTE 276M, single ended synchronous AES
- Number of Outputs 4 on 7720AD4
- Connectors BNC per IEC 61169-8 Annex A
- Sampling Rate 48kHz
- Impedance 75Ω unbalanced
- Dynamic Range 20-bit
- Balanced AES Audio Outputs-B versions only
- Standard AES3-1992
- Number of Outputs 4 on 7720AD4-B
- Connector Terminal strip
- Sampling Rate 48kHz
- Impedance 110Ω balanced
- Dynamic Range 20-bit
- Analog Audio OutputsA4 Versions Only
- Number of Outputs 4
- Type Balanced analog audio
- Connector Terminal strip
- Output Impedance 66Ω balanced
- Sampling Frequency 48kHz
- Signal Level 0dB FS => 8 to 24dBu into 10kΩ loads (user settable)
- 0dB FS => 8 to 22dBu into 600Ω loads (user settable)
- Frequency Response < ±0.1dB (20Hz to 20kHz)
- THD+N > 90dB RMS @ 1kHz, with 24dBu output
- > 100dB RMS @ 20Hz to 20kHz, with 24dBu output
- Crosstalk Isolation > 100dB RMS (20Hz to 20kHz)
- Voltage +12V DC
- Power 12 watts
- EMI/RFI Complies with FCC Part 15, Class A
- EU EMC Directive
Related products
-
Pro Audio, Wireless Microphone Systems, Antenna Accessories
Sennheiser AC2 RF Combiner and Power Supply for Multiple SR 300 IEM Monitor Transmitters
Pro Audio, Wireless Microphone Systems, Antenna AccessoriesSennheiser AC2 RF Combiner and Power Supply for Multiple SR 300 IEM Monitor Transmitters
The Sennheiser AC2 is an RF signal combiner designed for use with the Sennheiser IEM G2 monitor system transmitters. The AC2 features four hardwired BNC cables for connecting four SR 300 transmitters. The AC2 combines the signal from all four transmitters and sends it via the single BNC antenna output. The AC2 also features DC power output cables for remotely powering connected SR 300 receivers.
SKU: AC2 -
Pro Audio, Audio for Video, Wireless Microphone Accessories, Cases & Carrying Gear
Sennheiser CC2 Carry Case – for Sennheiser Evolution G2 Series Wireless Microphone Systems
Pro Audio, Audio for Video, Wireless Microphone Accessories, Cases & Carrying GearSennheiser CC2 Carry Case – for Sennheiser Evolution G2 Series Wireless Microphone Systems
The Sennheiser CC2 or CC2EW Carrying Case is a foam lined case designed to accommodate the Sennheiser Evolution (EW) G2 series wireless microphone systems. The inserts are designed to fit a rack-mountable receiver, handheld transmitter, body-pack transmitter and accessories..
SKU: CC2 -
Pro Audio, Live sound, Wireless Microphones, Wireless Systems
Sennheiser EW335 G3 Wireless Handheld Microphone System with MD835 Mic (B: 626 to 668 MHz)
Pro Audio, Live sound, Wireless Microphones, Wireless SystemsSennheiser EW335 G3 Wireless Handheld Microphone System with MD835 Mic (B: 626 to 668 MHz)
Key Features
- Frequency B: 626 to 668 MHz
- UHF Receiver
- Handheld Transmitter
- MD835 Cardioid Dynamic Capsule
The Sennheiser EW335 G3 Wireless Handheld Microphone provides dependable performance for both speech and performance applications and includes a UHF diversity receiver and handheld transmitter. The transmitter and receiver synchronize channel and frequency at the touch of a button. An ethernet port is featured on the EM300 rackmount
SKU: EW335-G3
