Blackmagic Design Pocket Cinema Camera 4K DC Cable Pack
In stock
Key Features
- Power Your Pocket Cinema Camera 4K
- Three DC Power Cables
- 2-Pin Power to D-Tap Cable
- 2-Pin Power to 2.5mm Barrel Cable
This Blackmagic Design Pocket Cinema Camera 4K DC Cable Pack contains three different cables to power your Pocket Cinema Camera 4K. You can choose to power your camera via its 2-pin power port through D-Tap, 2.5mm barrel, or add your own connector on the cable with flying leads. Each cable measures 25.6″ long.
In stock
This Blackmagic Design Pocket Cinema Camera 4K DC Cable Pack contains three different cables to power your Pocket Cinema Camera 4K. You can choose to power your camera via its 2-pin power port through D-Tap, 2.5mm barrel, or add your own connector on the cable with flying leads. Each cable measures 25.6″ long.
| Video Resolution | 4K |
|---|
Connectors
- Cable 1: 2-Pin to D-Tap
- Cable 2: 2-Pin to 2.5 mm Barrel
- Cable 3: 2-Pin to Flying Leads
Length
- Each: 25.6″ / 65 cm
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
Professional Camcorder Batteries
Blackmagic Design Pocket Cinema Camera Battery
Key Features
- 7.4V EN-EL20 Type Lithium-Ion
- 50 Minute Continuous Recording Time
- 800mAh
The Blackmagic Design Pocket Cinema Camera Battery is an EN-EL20 type 7.4V, 800mAh lithium ion rechargeable battery. It features a 50 minute continuous recording time, and it charges in approximately 75 minutes when the camera is off and in approximately two hours when the camera is in use.
SKU: BMPCCASS/BATT -
Digital Cine Cameras
Blackmagic Design Pocket Cinema Camera
Key Features
- Super 16mm Sized Image Sensor
- Active Micro Four Thirds Lens Mount
- 13 Stops of Dynamic Range
- Records Full HD 1920×1080 CinemaDNG RAW
The Blackmagic Pocket Cinema Camera from Blackmagic Design is a compact Super 16 format camera designed for digital film production. The Super 16 sized sensor has an effective resolution of 1920 x 1080 and is capable of capturing 13 stops of dynamic range.
SKU: CINECAMPOCHDMFT -
Digital Cine Cameras
Blackmagic Design Cinema Camera (MFT Mount)
Key Features
- 2.5K Image Sensor
- 12-bit RAW, ProRes, and DNxHD Formats
- 13 Stops of Dynamic Range
- 23.98, 24, 25, 29.97, 30p Frame Rates
The Blackmagic Design Cinema Camera features a 2.5K image sensor, 13 stops of dynamic range, and a Micro Four Thirds lens mount. It is capable of recording 12-bit CinemaDNG RAW files at full 2.5K (2432 x 1366) resolution, as well as 10-bit Apple ProRes and Avid DNxHD formats at 1080p.
SKU: CINECAM26KMFT
Related products
-
Video Signal Converters
Blackmagic Design Mini Converter SDI to Analog 4K
Key Features
- Single Link SD/HD/3G/6G-SDI Input
- Component, Composite, & S-Video Output
- SD, HD, UHD 4K & DCI 4K Input Signals
- Automatic Input Signal Detection
The Mini Converter SDI to Analog 4K from Blackmagic Design allows you to convert Single Link SD/HD/3G/6G-SDI to analog SD/HD component, composite, or S-Video. The down-converter lets you to connect professional SDI equipment which outputs resolutions up to Ultra HD 4K (3840 x 2160) and DCI 4K (4096 x 2160) with SD and HD analog video monitors
SKU: CONVMASA4K -
Capture Devices
Blackmagic Design Deck link SDI 4K Capture & Playback Card
Key Features
- SD/HD/3G/6G-SDI Input/Output
- PCIe Interface
- UHD / DCI 4K 4:2:2 by Single-Link 6G-SDI
- 1080p 4:4:4 by Single-Link 3G-SDI
The Decklink SDI 4K Capture & Playback Card from Blackmagic Design features a single multi-rate SDI input and multi-rate SDI output. These multi-rate connections accept single-link SD, HD, 3G, and 6G-SDI signals, providing support for resolutions from SD to Ultra HD 4K (3840×2160) and DCI 4K (4096×2160).
SKU: BDLKSDI4K -
Professional Video, Studio & EFP Equipment, Production Switchers & Controllers, Professional Video Switcher Accessories
Blackmagic Design GPI & Tally Interface for ATEM Production Switchers
Professional Video, Studio & EFP Equipment, Production Switchers & Controllers, Professional Video Switcher AccessoriesBlackmagic Design GPI & Tally Interface for ATEM Production Switchers
Key Features
- Displays Tallies for Video Signals
- Indicates On-air Status
- For ATEM Switchers / Videohub Routers
- 8 Contact Closure Inputs & Outputs
The Blackmagic Design GPI & Tally Interface for ATEM Production Switchers is designed to display tallies to indicate the on-air status of video signals. It features 8 contact closure inputs and 8 contact closure outputs for connecting to ATEM switchers and Videohub routers for operation.
SKU: SWTALGPI8 -
Video Signal Converters
Blackmagic Design OpenGear Converter SDI to Analog Module
Key Features
- Use with OpenGear
- SDI to Analog Conversion
- Hardware Down Converter
- Connect HD-SDI to SD Equipment
The OpenGear Converter SDI to Analog Module from Blackmagic Design is a component designed for use in the modular OpenGear system. OpenGear is essentially an open-standards chassis that can be mounted in a rack for conversion and processing work.
SKU: CONVOPENGASA -
Video Signal Converters
Blackmagic Design Mini Converter Heavy Duty – Analog to SDI
Key Features
- Rugged Machined Aluminum
- Analog to SDI Conversion
- HD/SD Component, Composite, S-Video In
- NTSC/PAL Input
The Mini Converter Heavy Duty – Analog to SDI from Blackmagic Design is an extremely rugged device that accepts an HD/SD component, NTSC, PAL (composite), or S-Video signal and converts it to an SDI output (a second loop-through output is also provided). You can also choose to embed SDI audio from the balanced AES/EBU or L/R analog audio inputs.
SKU: CONVMH/DUTYAAS
There are no reviews yet.