Sennheiser MZW66 Pro Foam Windscreen for ME66 Microphone (Black)
In stock
Black velour coated foam windscreens offer even greater protection for reducing wind and popping noise.
In stock
Black velour coated foam windscreens offer even greater protection for reducing wind and popping noise.
Compatible Mic Diameter
- 0.9″ / 23 mm
Material
- Foam
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
Professional Video Streaming Media Solutions
Blackmagic Design Web Presenter
Key Features
- Stream Any SDI or HDMI Signal in 720p HD
- Connect Virtually Any SDI or HDMI Camera
- Presents SDI/HDMI Source as USB Webcam
- Built-In Teranex Conversion Technology
The Blackmagic Design Web Presenter is a compact desktop device that allows you to connect any SDI or HDMI camera signal and stream it live on the Web in 720p HD. Connect a camera or any other source, and then connect the Web Presenter to your computer’s USB port.
SKU: BDLKWEBPTR -
Digital Cine Cameras
Blackmagic Design Cinema Camera (MFT Mount)
Key Features
- 2.5K Image Sensor
- 12-bit RAW, ProRes, and DNxHD Formats
- 13 Stops of Dynamic Range
- 23.98, 24, 25, 29.97, 30p Frame Rates
The Blackmagic Design Cinema Camera features a 2.5K image sensor, 13 stops of dynamic range, and a Micro Four Thirds lens mount. It is capable of recording 12-bit CinemaDNG RAW files at full 2.5K (2432 x 1366) resolution, as well as 10-bit Apple ProRes and Avid DNxHD formats at 1080p.
SKU: CINECAM26KMFT -
Pro Audio, Audio for Video, Wired Microphones, Shotgun Microphones
Sennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone
Pro Audio, Audio for Video, Wired Microphones, Shotgun MicrophonesSennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone
Key Features
- For Pro Film, TV & Location Recording
- Moisture-Resistant for Humid Conditions
- No Switches, Buttons, or Dials
- 40 Hz to 20 kHz Frequency Response
Achieve superb audio capture in demanding conditions for your next professional film, TV, or location recording with the Sennheiser MKH 416-P48U3 moisture-resistant shotgun microphone. Mix-ready sound quality is provided by its sharp directivity, low noise, and strong output. Plus, there are no controls to worry about; the MKH 416-P48U3 delivers the reliability you need for high-pressure gigs.SKU: MKH-416P48V3 -
Photography, Digital Cameras, DSLR Cameras
Canon 200D DSLR Camera with 18-55mm Lens (Black)
Key Features
- 24.2MP APS-C CMOS Sensor
- DIGIC 7 Image Processor
- 3″ 1.04m-Dot Vari-Angle Touchscreen LCD
- Full HD 1080p Video Recording at 60 fps
With a compact and lightweight body, the black Canon 200D DSLR Camera provides users with a fully-featured system that won’t weigh them down. Packed into the tiny body is a capable 24.2MP APS-C CMOS sensor and a DIGIC 7 Image Processor, both of which work together to create sharp, vivid images at native sensitivities up to ISO 25600
SKU: Canon 200D DSLR -
Pro Audio, Audio for Video, Wired Microphones, Stereo & Specialty Microphones
Rode Stereo VideoMic Pro Rycote
Pro Audio, Audio for Video, Wired Microphones, Stereo & Specialty MicrophonesRode Stereo VideoMic Pro Rycote
Key Features
- Ideal for Video & DSLR Cameras
- Integrated Rycote Lyre Shockmount
- Matched Pair, 1/2″ Condenser Capsules
- XY Stereo Configuration
The Stereo VideoMic Pro Rycote from Rode builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.SKU: SVM PRO
Related products
-
Pro Audio, Audio for Video, Wired Microphone Accessories, Shotgun Wind Protection
Sennheiser MZW-701 Blimp Windscreen for Sennheiser MKH70/ME67 with K6 Power Module
Pro Audio, Audio for Video, Wired Microphone Accessories, Shotgun Wind ProtectionSennheiser MZW-701 Blimp Windscreen for Sennheiser MKH70/ME67 with K6 Power Module
Key Features
- For Use in Outdoor, Windy Environments
- Provides Suppression of Wind Noise
- Lightweight, Rugged Protective Basket
- Protects Mic from Dirt and Moisture
The MZW-701 Blimp Windscreen from Sennheiser is a lightweight, rugged protective basket windshield that provides excellent suppression of wind noise when used for outdoor applications. It is compatible with the ME-67 and MKH-70 microphones and the length is approximately 22.4″. This windscreen requires the MZS 20-1 shockmount/pistol
SKU: MZW 70-1 -
Pro Audio, Studio Recording, Recording Microphones, Modulator microphone components
Sennheiser ME34 MZH Cardioid Microphone Capsule (Black)
Pro Audio, Studio Recording, Recording Microphones, Modulator microphone componentsSennheiser ME34 MZH Cardioid Microphone Capsule (Black)
Key Features
- For Universal Miking Applications
- Element Based on KE10 Capsule
- Contact Points are Gold Plated
The Sennheiser MZH series capsules are modular and designed for mounting to the MZH series goosenecks and other available accessories.
The ME34 is a miniature capsule with a cardioid pattern and wide frequency response. The ME34 is designed for basic sound reinforcement applications where minimal suppression
SKU: ME-34 -
Pro Audio, Wireless Microphone Systems, Antenna Accessories
Sennheiser AB 3 Antenna Booster (B: 626 to 668 MHz)
Pro Audio, Wireless Microphone Systems, Antenna AccessoriesSennheiser AB 3 Antenna Booster (B: 626 to 668 MHz)
Key Features
- For ew G3 Series Receivers
- Adds 10 dB of Amplification
- Suitable for Long Cable Runs
The AB 3 Antenna Booster (B: 626 to 668 MHz) from Sennheiser compensates for signal loss over long cable runs by adding 10 dB of amplification to ew G3 Series receivers.
SKU: AB3-B -
Pro Audio, Audio for Video, Wireless Microphone Accessories, Cases & Carrying Gear
Sennheiser CC3 Carrying Case
Pro Audio, Audio for Video, Wireless Microphone Accessories, Cases & Carrying GearSennheiser CC3 Carrying Case
Key Features
- Fits Evolution EW G3 and G4 Components
- Plastic with Custom-Cut Interior
- Convoluted Foam in the Lid
- Molded Carry Handle
The Sennheiser CC3 Carrying Case (Black) is a plastic hardshell, foam-lined case designed to carry Sennheiser EW G3 and G4 Evolution wireless microphone components. The padding is precision die-cut with convoluted foam in the lid.
SKU: CC3
There are no reviews yet.