Evertz 7720DAC-A4 Dual AES to Quad Analog Audio Converter with Unbalanced/Balanced AES Inputs

Evertz
Availability:

In stock


Features

  • AES3/IEC-958 or AES-3id/SMPTE276/S/PDIF
  • 24-bit, high-quality conversion
  • 44.1 and 48KHz sampling rate
  • 0dBFS programmable from 12dBu to 25dBu
  • Support for 4 channels of balanced analog audio (2 AES/EBU)
  • Clock recovery via VCXO for extra stable sample clock generation
  • A card edge display provides a 4 channel bar graph type level indicator display for confidence monitoring
  • Local card edge display for level setup
  • Drives directly 600Ω loads

The 7720DAC-A4 is a high-quality, 24-bit, digital to analog audio converter which converts 2 AES/EBU digital signals to 4 balanced analog audio signals. The 7720DAC-A4 has two independent AES/EBU converters. The inputs sample rate supported are 44.1 KHz and 48KHz. All analog audio outputs levels may be set individually from the front panel.

Level control is provided via a card edge toggle and the set gain level can be read out from a card edge display for convenience. The full scale digital signal can be calibrated to accommodate peak levels ranging of 12dBu to 25dBu with 0.1dB resolution.

The audio DAC features a card edge VU meter for quick confidence monitoring. Four separate level indicators are provided via bargraphs for quick validation of audio program material.

SKU: 7720DAC-A4+1RU Category: Tag:

Unbalanced AES Audio Inputs 7720DAC-A4

Number of Inputs

  • 2

 

Standard

  • SMPTE ST 276M, unbalanced AES

Connectors

  • BNC per IEC 169-8

Signal Level

  • 0.1 to 2.5V p-p

Equalization

  • 1000m @ 48kHz with 1V p-p drive and Belden 8281 or equivalent coax cable

Resolution

  • 24-bit

Sample Rate

  • 44.1, 48kHz, ±100ppm (all other rates between 42 – 50kHz will remain audible but somewhat distorted)

Input Impedance

  • 75Ω, AC-coupled

Return Loss

  • < 25dB, 0.1 – 6.0MHz

BNC Grounding

  • AC-coupled (for 60Hz ground loop current protection)

Balanced AES Audio Inputs 7720DAC-A4-B

Number of Inputs

  • 2

Standard

  • AES3-1992, balanced AES

Connectors

  • 3-pin removable terminal strip

Signal Level

  • 0.2 to 10V p-p

Equalization

  • 400m @ 48kHz with 2 – 10V p-p drive and Belden 1800B or equiv. shielded twisted pair cable

Resolution

  • 24-bit

Sample Rate

  • 44.1, 48kHz, ±100ppm (all other rates between 42 – 50kHz will remain audible but somewhat distorted)

Input Impedance

  • 110Ω ±10%, transformer coupled

Shield Grounding

  • AC-coupled (for 60Hz ground loop current protection)

Analog Audio Output

Number of Outputs

  • 4

Type

  • Balanced analog audio

Connectors

  • 2x 6-pin removable terminal strip

Output Impedance

  • 66ΩU

Signal Level

  • 0dB FS ⇒ 12-25dBu into 10kΩ load (user configurable)
  • 0dB FS ⇒ 12-24dBu into 600Ω load

Frequency Response

  • < ±0.05dB (20Hz to 20kHz)

Dynamic Range

  • 24-bit

THD+N

  • < -100dB RMS @ 20Hz to 20kHz, with 24dBu output, unweighted

SNR

  • 110dB RMS (20Hz to 20kHz), unweighted

Crosstalk Isolation

  • 110dB RMS (20Hz to 20kHz), unweighted

Inter-Channel Phase Error

  • < ±1°(20Hz to 20kHz)

Digital to Analog Delay

  • 0.95m sec

Electrical

Voltage

  • +12V DC

Power

  • 12 watts

EMI/RFI

  • Complies with FCC Part 15, Class A, EU EMC directive

Physical

Number of Slots

  • 2

 

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…

SHOPPING CART

close

Prices May Vary as Per Currency Parity


Please Contact us Before Placing an Order, Thank You.