Crestron TPS-RFGWX 2.4 GHZ WIRELESS 2-WAY RF GATEWAY TRANSCEIVER
In stock
Features:
The TPS-RFGWX gateway is an RF transceiver that allows Crestron 2.4 GHz 2-way wireless touchpanels to communicate with the control system via the Cresnet network.
In stock
The TPS-RFGWX gateway is an RF transceiver that allows Crestron 2.4 GHz 2-way wireless touchpanels to communicate with the control system via the Cresnet network. Crestron’s “Wi-Fi friendly” spread spectrum technology permits selection from 10 possible bands within the 2.4 GHz spectrum to minimize the possibility of interference with non-Crestron RF equipment including all 802.11 devices. The TPS-RFGWX affords a range of approximately 150 feet indoors and up to 1000 feet outdoors.
Related products
-
Professional Video, Used
Evertz X-NCP2 Router Control Panel
Features
- Provides crosspoint and configuration control for the Evertz® XRF series RF Routers and X series optical routers
- Two 4-line, 24 alphanumeric digit per line, vacuum fluorescent display, (VFD) featuring very high brightness and wide viewing angles
- Panel pushbuttons are illuminated, tactile and full-size
- Provides destination locks and passcode protection
- Low power and rack space requirements (2RU)
SKU: X-NCP2 -
Professional Video, Used
Evertz 7700VMDA Video Monitoring Reclocking Distribution Amplifier
Features
- Features independent isolated output drivers to ensure no cross channel loading effects (i.e. no need to
- terminate unused outputs)
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP
- VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7800FC
- VistaLINK® Frame Controller module in slot 1 of the frame
Input
- Supports SMPTE ST 259-C (270MB/s) video with embedded audio
- Return loss > 15dB up to 540MB/s
- 300m auto equalization at 270MB/s (Belden 8281)
Outputs
- Selectable reclocked/composite encoder outputs
- Return loss > 15dB up to 540MB/s
- Wideband jitter < 0.2UI
- Passes embedded audio to SDI output
SKU: 7700VMDA+3RU -
Photography, Batteries & Power Accessories, Used
Pro-X Intellicom 130S battery pack
Features:
All Brick batteries have a 4-stage LED Power Gauge so you can quickly reference the charge status of the battery in 25% increments The PRO-X batteries are available in both V-Type type mounting, so you can easily integrate the batteries into your pre-existing battery system.
SKU: INTELLICOM 130S (USED)
