Behringer CFM2 Replacement Crossfader Module
Features:
- 4-Pin Connector
The Behringer CFM2 is a replacement crossfade module with a 4-pin connection. In addition to serving as the replacement fader for the VMX1000, VMX300, VMX200, DJX700, DJX400, DX626 and DX052 DJ mixers, the CFM2 will replace faders on any mixer with a 4-pin connector. The CFM2 replacement fader is a viable solution for over worked faders that have worn-down over time.
Related products
-
Pro Audio, Studio Recording, Recording Microphones, Modulator microphone components
Sennheiser ME67 Supercardioid Spot Shotgun Mic Capsule
Pro Audio, Studio Recording, Recording Microphones, Modulator microphone componentsSennheiser ME67 Supercardioid Spot Shotgun Mic Capsule
Key Features
- For Use with K6 and K6P Powering Modules
- Supercardioid Polar Pattern
- Long Gun Microphone-Head Design
- Highly Directional
The ME 67 is a long gun microphone capsule designed for use with the K6 and K6P powering modules. A
highly directional microphone, it can be used where the microphone must be placed at a distance from the
sound source. The mic features a matt-black, anodized, and scratch-resistant finish.
SKU: ME-67 -
Pro Audio, Audio for Video, Wired Microphone Accessories, Shotgun Wind Protection
Sennheiser MZW-415 – Foam Windscreen (Gray)
Pro Audio, Audio for Video, Wired Microphone Accessories, Shotgun Wind ProtectionSennheiser MZW-415 – Foam Windscreen (Gray)
Made of an open cell foam material that represents the best compromise between minimal effect on the frequency response and maximum protection against wind and pop noise. for MKH-416.
SKU: MZW-415 ANT -
Pro Audio, Studio Recording, Recording Microphones, Modulator microphone components
Sennheiser K6 Microphone System Powering Module (Phantom/Battery)
Pro Audio, Studio Recording, Recording Microphones, Modulator microphone componentsSennheiser K6 Microphone System Powering Module (Phantom/Battery)
Key Features
- Modular Microphone Base
- High Output, Low Noise
- Switchable Bass Roll-Off Filter
- Transformerless Balanced Output
The K6 Microphone System Powering Module by Sennheiser is the compatible base for many modular capsules. It features high output levels with low noise, a switchable bass roll-off, and transformerless balanced output.
SKU: K-6 -
Pro Audio, Wireless Microphone Systems, Antenna Accessories
Sennheiser AC2 RF Combiner and Power Supply for Multiple SR 300 IEM Monitor Transmitters
Pro Audio, Wireless Microphone Systems, Antenna AccessoriesSennheiser AC2 RF Combiner and Power Supply for Multiple SR 300 IEM Monitor Transmitters
The Sennheiser AC2 is an RF signal combiner designed for use with the Sennheiser IEM G2 monitor system transmitters. The AC2 features four hardwired BNC cables for connecting four SR 300 transmitters. The AC2 combines the signal from all four transmitters and sends it via the single BNC antenna output. The AC2 also features DC power output cables for remotely powering connected SR 300 receivers.
SKU: AC2 -
Pro Audio, In-Line Problem Solvers, Level Matching Transformers
Datavideo BAC-03 Bidirectional Analog Audio Converter
Pro Audio, In-Line Problem Solvers, Level Matching TransformersDatavideo BAC-03 Bidirectional Analog Audio Converter
The Datavideo BAC-03 Bidirectional Analog Audio Converter is a bi-directional tool to simultaneously convert audio signals from balanced to unbalanced, and unbalanced to balanced.
SKU: BAC-03
