Computer Video Accessories, Post Production, Professional Video, Used

Evertz 7707MR13-HD-F2 CARD SDI 2 AES AUDIO BI-DIRECTIONAL

Availability:

In stock

Add to wishlist

Compare

Features:

General Purpose Inputs
Type Opto-isolated, active low with internal pullups to +5V or +12V (jumper selectable)
Number of Inputs 2

Add to quote

Description

SDI video, 2 AES audio, 1 bi-directional RS-232/422 and 2 GPI/O fiber optic receiver
Supports 525 or 625 line 4:2:2 component SDI signals
Supports SDTi signals
Supports 32, 44.1, 48kHz AES audio
Dolby® E compatible
Supports bi-directional RS-422 rates up to 3Mb/s
Incorporates Evertz patented SoftSwitch™ technology for virtually glitch-free AES Audio outputs when upstream SDI or AES feeds are switched
User selectable SoftSwitch™ bypass
Minimal Audio to Video latency
Output AES “Mute” on loss of fiber optic input signal or AES feed to upstream 7707MT multiplexer
Output Video “Black” or “Blue” (selectable) on loss of video input signal
Signal transport over fiber uninterrupted by loss of input SDI, AES, Serial Data or GPIO feeds
SDI video regeneration for jitter removal
Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
Local display of optical signal strength, video, audio and data presence, video and AES formats, EDH errors, GPI and GPO status
Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
Bi-directional optical input/output
Accepts any wavelength in the 1270nm to 1610nm range
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Supports single mode and multi-mode fiber optic cable
Optical Input / Output
Number of Connections 1 (single fiber version) or 2 (-F2 dual fiber version)
Connector Female SC/PC or FC/PC
Return Loss > 20dB
Rise/Fall Time 200ps nominal
Maximum Input Power 0dBm
Input Wavelength 1270nm to 1610nm
Input Optical Sensitivity
WDM (-w version) -26dBm
Standard -28dBm
Output Jitter < 0.2 UI
Wavelengths
Standard 1310nm, 1550nm
CWDM 1270nm -1610nm
DWDM C-Band (ITU-T G.694.1 compliant)
Output Power
1310nm FP -7dBm ±1dBm
1310nm (-W) -1dBm ±1dBm
1550nm, CDWM (DFB) 0dBm ±1dBm
DWDM (DFB) +7dBm ±1dBm
Serial Video Output
Standard SMPTE ST 259-C
Number of Outputs 1 (dual fiber -F2) or 2 (single fiber) regenerated
Connector BNC per IEC 61169-8 Annex A
Signal Level 800mV nominal
DC Offset 0V ±0.5V
Rise/Fall Time 900ps nominal
Overshoot < 10% of amplitude
Return Loss > 15dB up to 270Mb/s
Wideband Jitter < 0.15UI
AES Audio Output
Standard Jumper selected
Balanced AES3-1992 balanced AES
Unbalanced SMPTE ST 276
Other Dolby® E compatible
Number of Outputs 2 regenerated
Connector 4 pins on female high density DB-15
Signal Level
Balanced 5V p-p
Unbalanced 1V p-p
Resolution Up to 24 bits
Sampling Rate 32, 44.1, 48kHz
Intrinsic Jitter < 20ns
Impedance
Balanced 110Ω
Unbalanced 75Ω
General Purpose Inputs
Type Opto-isolated, active low with internal pullups to +5V or +12V (jumper selectable)
Number of Inputs 2
Connector 2 pins (plus ground) on female high density DB-15
Signal Drive Level Open or closure to ground
General Purpose Outputs
Type “Dry Contact” relay closure
Number of Outputs 2
Connector 2 pins per output on female high density DB-15
Signal Level Normally closed or normally open (jumper selectable)
Serial Data Input/Output
Type RS-422 or RS-232 – jumper selectable
Number of Ports 1 (RS-422) or 2 (RS-232)
Connector 4 pins (plus ground) on female high density DB-15
Baud Rate Up to 3Mb/s for RS-422 (Determined by incoming data)